SMA Sunny Island inverters

(for battery use & grid back up)

 

SUNNY ISLAND - The flexible System manager

The Sunny Islands offer you first class possibilities in the installation of self-sufficient energy systems. In conjunction with a battery pack the devices form a self-sufficient AC voltage grid, which meets with the highest of quality standards.

In the Sunny Island System, electricity generators and consumers are integrated in equal measure. PV and wind energy systems, diesel devices, water or CHP (Combined Heat and Power) can be coupled on the AC side just as conventional 230 Volt consumers.

Thus the Sunny Islands offer you two decisive advantages: at system planning and layout you can enjoy the highest degree of flexibility, during installation the complex DC cabling is not required.

 

SUNNY ISLAND 6.0H / 8.0H

Simple. Robust. Flexible.

More robust than its predecessors: The new Sunny Island impresses with its high protection class and wide temperature range. Moisture, dust and temperature fluctuations won’t impair its operation, even after 20 years. Thanks to OptiCool, there’s no need to compromise when it comes to overload capacity and profitability. And there’s more: OptiPower, the intelligent load and energy management system, ensures operation even in critical situations. OptiUse makes installation, commissioning and daily use easier than ever with automatic rotary field detection, an optimized quick configuration guide and intuitive operation. And the OptiBat battery management system automatically controls the most important charging and discharging procedures, which extends the service life of sensitive energy storage. Sunny Island is a truly comprehensive package for a worry-free, reliable and self-sufficient electricity supply.

SUNNY ISLAND 6.0H / 8.0H

The new Sunny Island impresses with its high protection class and wide temperature range. Moisture, dust and temperature fluctuations won’t impair its operation, even after 20 years. Thanks to OptiCool, there’s no need to compromise when it comes to overload capacity and profitability. And there’s more: OptiPower, the intelligent load and energy management system, ensures operation even in critical situations. OptiUse makes installation, commissioning and daily use easier than ever with automatic rotary field detection, an optimized quick configuration guide and intuitive operation. And the OptiBat battery management system automatically controls the most important charging and discharging procedures, which extends the service life of sensitive energy storage. Sunny Island is a truly comprehensive package for a worry-free, reliable and self-sufficient electricity supply.

*See technical data here

 

 

SUNNY ISLAND Charger 50

 DC Coupling from SMA: Now with 20 % More Power

 Nominal DC power up to 40 °C: 600 W / 1200 W / 2400 W

Sunny Island Charger 2010

AC and DC coupling in perfect interaction and from a single manufacturer: The all-purpose Sunny Island Charger 50 by SMA. Its broad DC input voltage range makes configuration possible for almost any PV module. Thanks to the integrated MPP tracking system, the charger guarantees an energy output between 15 to 30 % higher than that of conventional shunt charge controllers. Unique in charge controllers of this power range: The high protection class, fanless operation and broad temperature range enable its use even under extreme climatic conditions. Easy installation and automatic control through the Sunny Island make commissioning entirely foolproof.

  • Nominal battery voltage: 12 V / 24 V / 48 V
  • Max. DC voltage: 140 V DC

*See technical data here

 

Smart Load for SUNNY ISLAND

 Intelligent Dump Load for Stand-Alone Grids

 smartload for SMA inverters

The Smart Load is an electronic control for load resistors up to 6 kW from Critical Power Supplies optimized for the operation in Island grid systems with energy sources that only have a slow control or none at all Single phase or 3 phase input IP65

Intelligent dumpload for stand-alone grids

The Smart Load forms the perfect complement to unregulated energy generators in stand-alone grids, e.g., small, directly-connected wind generators with passive stall power control. If there is an electricity surplus, the Smart Load feeds it into special loads, for example, heating cartridges in a hot water tank. The necessary arrangement is completely automatic, fast and free of retroactive effects for other loads. This continuous and quick energy consumption allows for ideal protection of system components and guarantees increased reliability.

 

For Grid-connected inverter information, click here

 

To Order or Contact us
Name *
Invalid Input
Email *
Please enter a valid email address
Phone Number
Invalid Input
Postcode *
Invalid Postcode
Enquiry Details
Invalid Input
  

 

Solazone

SOLAR STREET LIGHTS .  .  .

are made in Davao.

streetlight poless


 WE ARE PROUDLY A PHILIPPINES COMPANY

Asia solar radiation map

AND WE SERVE ALL THE PHILIPPINES MARKET