Hot water circulation pumps

240 volt circulator pumps for hot water

Grundfos UPA - Household hot water

Home booster: the pump increases the pressure so that the required pressure is available at showers, taps etc for domestic water. The pump is used in open systems and can be connected directly to the water main.

Features:

Easy installation
Low noise
Water-cooled system
Leakage free
Energy saving
Space intelligent


Grundfos Comfort system

Hot Water Recirculation: Grundfos Comfort system ensures that there is always hot water available when it is needed and prevents water wastage resulting from the draining of cold water.

The Grundfos Comfort system uses the cold water supply line as the “return-line” to the water heater. A Comfort pump is used to create a pressure di` erential that allows the cold water in the hot water supply line to by-pass (at low volume) into the cold supply line through a patented thermostatically controlled valve that is mounted under the sink furthest from the water heater.

Comfort pumps are suitable for solar hot water systems.

Features:

Easy installation
Instant hot water
No waste of precious drinking water!
Energy effective pump with the built-in timer and thermostat (BUT model)


Grundfos UPN

The UPN circulator Pumps in stainless steel are specifi cally designed for household hot water systems, and solar hot water applications.

Features:

Meets requirements of AS/NZS 4020 “Testing of products for use in contact with drinking water”. No risk to water quality thanks to the main components being stainless steel (pump housing, bearing plate, stator and rotor can (stainless steel AISI 304)
Interchangeable with most of the installed bronze models (150 mm port to port - G 1”1/4)
Especially designed for hot water application UP20-45N model can also be used with chilled water from -25 °C


Grundfos UPS & Alpha2 Household Heating

The circulator pumps in cast iron pump housing version are specifically designed for heating systems. For underfloor heating systems, it is advisable to use the bronze version, type ALPHA 2 B and UPS B, as the pumped liquid may often become aerated, causing an ordinary cast iron pump housing to corrode.

Features:

UPS can be operated at three speeds
ALPHA 2 automatically controls the differential pressure by adjustment of pump performance to the actual heating demand, without the use of external components

 

 

 

12 volt circulator pumps for solar hot water systems and radiators



  • Seal-less, leakproof magnetic drive.
  • Quiet operation.
  • Extremely low power consumption.
Typical applications:
  • Cold or hot water circulation in homes, boats, RV’s, or industrial transfer.
  • Fish tank circulation.
  • PV-powered solar applications.
  • Process control applications.
  • Laboratory services.
Features:
  • Shaftless spherical pump design - the only moving part in the pump cavity is the rotor / impeller unit. Eliminates start-up problem
  • Rotor / impeller glides effortlessly on ultra-hard ceramic ball - minimal bearing surface lowers starting torque requirements and improves motor efficiency. Very low energy consumption.
  • Modular construction. Standard screw ring construction allows switching motor without changing pump housing.
  • Virtually maintenance-free - Self lubricating, dependable operation.
  • No shafts or seals in the fluid side to leak or corrode.
  • Clog-resistant - rotor / impeller automatically tilts to allow small particles to pass freely through pump cavity.

 

The Laing mag-coupled spherical motor design offers many benefits over other pump styles: it operates on extremely low input at a specified nominal voltage up to 24 volts; the spherical permanent magnet eliminates impellor slippage; the motor does not have a shaft is fully potted and has no moving parts; the pump has no seals; and both the drive and motor magnets have thick cross-sections that resist cracking due to thermal shock.  The brushless motor has a lifetime of 10,000 hours when operated at 12 volts and can be powered directly by solar panels, battery or other dc power sources.  The unique screw ring design for this series of pumps allows the changing of motors without changing pump housings.

Technical Data
  • Motor design: Electronically commutated, spherical motor

  • Voltage Range: 6 to 24 volts dc

  • Maximum system pressure: 150 psi(brass housing), 50 psi (plastic housing)

  • Temperature range: -10°C to 95°C(brass), 0°C to 60°C (plastic)

  • Suitable for: Domestic hot water, heating water, water / glycol mixtures and other media on request.

 

Servicing the pump in-situ is easy with the unique screw ring construction.

A twist of the screw ring separates the rotor / impeller and motor drive unit from the pump housing.

he rotor / impeller unit is free to spin and tilt, to allow small particles to pass through the system without jamming the pump.

Price - $345 incl GST

 

Solar pump controllers

 

These solar pump controllers measure the temperature difference between the solar panels and the bottom of the hot water storage tank, and switch the circulator pump on when there is solar heat available to be collected. Some controllers also have 'frost mode' which starts the pump when the roof temperature approaches freezing, to protect the solar collectors from frost damage.

 

We stock and sell replacement 240 volt and 12 volt solar pump controllers, as originally supplied by various manufacturers.

 

Prices : $ 280  - 240 volt

 

             $365  - 12 volt dc

 

We also stock many other solar hot water spare parts, including replacement sensors, seals and valves.   Call us with your requirements.

To Order or Contact us
Name *
Invalid Input
Email *
Please enter a valid email address
Phone Number
Invalid Input
Postcode *
Invalid Postcode
Enquiry Details
Invalid Input
  

Solazone

Wind Generators

Q4Corrosion-proof for Philippines

Solazone

SOLAR STREET LIGHTS .  .  .

are made in Davao.

streetlight poless


 WE ARE PROUDLY A PHILIPPINES COMPANY

Asia solar radiation map

AND WE SERVE ALL THE PHILIPPINES MARKET