![]() |
The SC3D is a micro processor based used to heat your pool/spa from your solar collector. The controller does this by sensing the temperature on the roof and the temperature of the pool. If the roof temperature rises 7° above the pool temperature and the pool temperature is below the set point then the controller will switch power to the solar pump, which in turn will cycle the poo water through the collector to heat the water and then return it to the pool. Ifthe pool temperature rises 1° above the set point or the roof temperature falls to within 2° of the pool water the controller will switch power off to the solar pump. Features: - Sample and Hold Temperature Display - Simple one touch buttons - Pool, set point and roof temperature display - Winter mode - Manual mode - Heating/Cooling Mode - Temperature sensor error indication
INPUT: 230/240V10A50Hz MAX TOTAL LOAD: 10A |
|
|
![]() |
The SC2D is a micro processor based used to heat your pool/spa from your solar collector. The controller does this by sensing the temperature on the roof and the temperature of the pool. If the roof temperature rises 7° above the pool temperature and the pool temperature is below the set point then the controller will switch power to the solar pump, which in turn will cycle the pool water through the collector to heat the water and then return it to the pool. If the pool temperature rises 1° above the set point or the roof temperature falls to within 2° of the pool water the controller will switch power off to the solar pump. Features: - Feather touch buttones - Pool, set point and roof temperature display - Winter mode - Manual Mode - Temperature sensor error indication
INPUT: 230/240V10A50Hz MAX TOTAL LOAD: 10A |
These controllers are made in Australia, and are not ordinarily held in stock.
Delivery time is generally 3-4 weeks after your order is processed.